Craftsman DD2101 Manual De Usuario

7 – English

 To prevent accidental starting that could 

cause serious personal injury, always remove the bat-
tery pack from the product when assembling parts.

See Figure 2, page i.
An auxiliary handle is packed with the drill for ease of 
operation and to help prevent loss of control. The handle 
can be mounted on either side for left or right hand use.


  Insert handle screw into hole located above trigger 

switch and seat hex head into hole.



  Slide handle collar onto screw, seat hex end of collar 

into hex hole.



  Thread auxiliary handle onto screw and secure tightly.

 Always use the auxiliary handle when 

using this tool to help resist torque reactions. Bind-
ing or stalling of this product could lead to serious 
personal injury.

WARNING: 

Do not allow familiarity with tools 

to make you careless. Remember that a careless 
fraction of a second is sufficient to inflict serious 
injury.

WARNING: 

Always wear eye protection with side 

shields marked to comply with ANSI Z87.1. Failure to 
do so could result in objects being thrown into your 
eyes resulting in possible serious injury.

 Do not use any attachments or 

accessories not recommended by the manufacturer of 
this tool. The use of attachments or accessories not 
recommended can result in serious personal injury.

You may use this product for the purposes listed below:
 

Drilling in all types of wood products (lumber, plywood, 
paneling, composition board, and hard board)

 

Drilling in ceramics, plastics, fiberglass, and laminates

 

Drilling in metals

 

Driving screws into wood and drywall with screwdriver 
bits

This product will accept Craftsman

®

 19.2 V lithium-ion 

battery packs and Craftsman

®

 19.2 V nickel-cadmium bat-

tery packs. 
For complete charging instructions, refer to the Operator’s 
Manual for your battery pack and charger models.

See Figure 3, page i.
The C3 energy indicator window located on the side of the 
handle, just above the base, will light when some Crafts-
man

®

 19.2 V lithium-ion battery packs are installed and 

have charge (315.113710, 315.PP2000, 315.PP2010,  
315.PP2020, 315.PP2030).
NOTE: Feature will not light with Craftsman

®

 19.2 V 

nickel-cadmium battery packs.

See Figure 3, page i.
To install:
 

Lock the switch trigger by placing the direction of 
rotation selector in the center position.

 

Place battery pack in the tool. Align raised rib on 
battery pack with groove inside tool.

 

Make sure the latches on each side of the battery pack 
snap into place and battery pack is secured in tool 
before beginning operation.

 Always remove battery pack from 

your tool when you are assembling parts, making 
adjustments, cleaning, or when not in use. Removing 
battery pack will prevent accidental starting that could 
cause serious personal injury.

To remove:
 

Lock the switch trigger by placing the direction of 
rotation selector in the center position.

 

Locate latches on end of battery pack and depress to 
release battery pack from the tool.

 Remove battery pack.

 Battery products are always in operating 

condition. Therefore, the switch should always be 
locked when not in use or carrying at your side.