Craftsman 17608 Manual De Usuario

WARNING:   Always wear safety goggles complying with ANSI Z87.1 (or in 
                    Canada, CSAZ94.3) before using blower.

WARNING:   Keep bystanders clear from blowing debris.

WARNING:   Wear a dust mask if blowing creates dust that might be inhaled. 

This Wet/Dry Vac has blowing capabilities.  
To use the blower feature follow the 
instructions listed.
1.  Verify that the power cord is 
     disconnected from the outlet.  (Fig.1)
2.  Make sure the collection tank is empty 
     before using as a blower.
3.  Remove hose from the vacuum port.
4.  Insert the larger end of the hose into the 
     blowing port on the back side of the 
     power head.  (Fig. 2)
5.  Fit the desired attachment to the hose.  
     (Fig. 3)
6.  Verify that the power switch is in the ‘O’ 
     OFF position before plugging the power 
     cord into the outlet.  (Fig. 4, Fig. 5)
7.  Before turning ON the vac, firmly hold 
     the loose end of the hose.  Turn the 
     motor on by pressing the switch to the ‘I’ 
     ON position.  (Fig. 6)
8.  Once you have completed vacuuming, 
     press the power switch to the 'O' (OFF) 
     position and unplug the power cord 
     from the outlet.  (Fig. 7)

9