George Foreman Indoor/Outdoor Grill Manual De Instrucciónes
5
4
Product may vary slightly from what is illustrated.
† 1. Lid handle (Part # 22869)
† 2. Lid (Part # 22865)
† 3. Temperature control probe (Part # 22866)
† 4. Grill base (Part # 22867)
† 5. Grill plate (Part # 22873GP)
† 6. Drip tray (Part # 22868)
† 7. Upper pedestal tube (Part # 22872)
† 8. Lower pedestal tube (Part # 22871)
† 9. Pedestal stand (Part # 22863)
Note: † indicates consumer replaceable/removable parts
† 2. Lid (Part # 22865)
† 3. Temperature control probe (Part # 22866)
† 4. Grill base (Part # 22867)
† 5. Grill plate (Part # 22873GP)
† 6. Drip tray (Part # 22868)
† 7. Upper pedestal tube (Part # 22872)
† 8. Lower pedestal tube (Part # 22871)
† 9. Pedestal stand (Part # 22863)
Note: † indicates consumer replaceable/removable parts
how to Use:
This product is for household use only.
ASSEMBLY INSTRUCTIONS
1. Unpack your George Foreman® grill and check that all parts are present
ASSEMBLY INSTRUCTIONS
1. Unpack your George Foreman® grill and check that all parts are present
(see A).
2. Before first use wash the grill plate, drip tray and lid in warm, soapy water.
Wipe with a damp cloth and dry thoroughly.
Important: Do not immerse temperature control probe in water or any
other liquid. To clean, wipe with a damp cloth and dry thoroughly.
3. Place the pedestal stand on a flat, level surface.
4. Insert slotted end of lower pedestal tube into hole in center of pedestal
3. Place the pedestal stand on a flat, level surface.
4. Insert slotted end of lower pedestal tube into hole in center of pedestal
stand; push down firmly.
5. Insert tapered end of upper pedestal tube into top of lower pedestal tube
and screw tubes together.
6. Place grill base on top of pedestal tube assembly through hole in center of
grill base. Rotate slightly so tabs on pedestal tube assembly align with slots
in grill base; always make sure grill base is level.
7. Lift locking latch up so it engages with locking
ring on bottom of grill base and firmly lock into
place (B).
8. Slide drip tray into position on grill base using
guide rails.
9. Attach lid handle to lid from the inside.
10. Place lid over grill. Your grill is now ready for use!
10. Place lid over grill. Your grill is now ready for use!
GRILLING OUTDOORS
1. Turn temperature control probe to OFF position and attach securely into
1. Turn temperature control probe to OFF position and attach securely into
probe receptacle.
2. Plug into a standard electrical outlet.
3. Align desired temperature setting with indicator light. Place lid securely on
3. Align desired temperature setting with indicator light. Place lid securely on
grill.
4. Allow to preheat to desired temperature—approximately 10 minutes. See
SUGGESTED GRILLING CHARTS for more details.
5. Carefully lift lid and place food onto grill; for most food, you will want to
cover it, so place the lid over the grill.
6. Adjust temperature as needed. Indicator light on temperature control
probe will cycle on and off as thermostat maintains proper temperature;
this is normal operation.
B
A