Kärcher K3 CAR Manual De Usuario

몇 CAUTION

Keep a distance of at least 30 cm when using the jet for 
cleaning painted surfaces to avoid damage.
ATTENTION
Car tyres, paint or sensitive surfaces such as wood 
should not be cleaned with the dirt blaster, as there is a 
risk of damage.
Illustration 


Push the spray lance into the trigger gun and fasten 
it by turning it through 90°.



Turn on the appliance “I/ON”.



Unlock the lever on the trigger gun.



Pull on the lever of the trigger gun; the device will 
switch on.

Note: Release the lever of the trigger gun; the device 
will switch off again. High pressure remains in the sys-
tem.

ATTENTION
Risk of damage to the paintwork
When working with the washing brush, it must be free of 
dirt or other particles.


Push the washing brush into the trigger gun and 
fasten it by a 90° turn.

Note: If required, the washing brushes can be used to 
work with detergent.

Note: Detergent can only be added when the device is 
operated in low pressure mode.

 DANGER

When using detergents, the material data safety sheet 
issued by the detergent manufacturer must be adhered 
to, especially the instructions regarding personal pro-
tective equipment.
Illustration 


Fill the detergent solution in the detergent tank (ob-
serve dosage instructions on the packaging of the 
detergent).

Illustration 


Close the detergent tank with the lid.



Lock the detergent tank in place on the appliance.

Illustration 


Use spray lance with pressure regulation (Vario 
Power).



Turn the spray lance to "Mix" position.
Note: This will mix the detergent with the water 
stream.

Optional


Fill the detergent solution in the detergent tank of 
the foam nozzle (observe dosage instructions on 
the packaging of the detergent).



Spray the detergent sparingly on the dry surface 
and allow it to react, but not to dry.



Spray off loosened dirt with the high pressure jet.



Release the lever on the trigger gun.



Lock the lever on the trigger gun.



Insert the trigger gun in its holder.



During longer breaks (more than 5 minutes), also 
turn the appliance off using the "0/OFF" switch.

몇 CAUTION

Only separate the high-pressure hose from the hand 
spray gun or the appliance when there is no pressure in 
the system.


After operation with detergent: Run the machine for 
approximately 1 minute for a clear rinse.



Release the lever on the trigger gun.



Turn off the appliance "0/OFF".



Disconnect the mains plug from the socket.



Turn off tap.



Press the lever on the trigger gun to release any re-
maining pressure in the system.



Lock the lever on the trigger gun.



Detach the appliance from the water supply.

몇 CAUTION



Pull the appliance by its transport handle.



Empty detergent tank.



Secure the appliance against shifting and tipping 
over.