Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Notas de publicación
42
Release Notes for Cisco ONS 15454 Release 4.0.1
OL-4470-01
New Features and Functionality
Eight Port OC-3
A new equipment type, OC3-8, has been added for the ENT-EQPT command. OC3IR-STM1SH-1310-8
has been added to the “EQPT_TYPE” enum table. The LASEREOL (“Laser Approaching End Of Life”)
alarm has also been added. All TL1 commands supported for 4 port OC3 also apply to the eight port
OC-3.
has been added to the “EQPT_TYPE” enum table. The LASEREOL (“Laser Approaching End Of Life”)
alarm has also been added. All TL1 commands supported for 4 port OC3 also apply to the eight port
OC-3.
Prompting Feature
A TL1 Prompting tool has been added. This feature is primarily for prompting options for command
(VMM) and payload prompting. Other fields are mostly mandatory and user input is required for them.
(VMM) and payload prompting. Other fields are mostly mandatory and user input is required for them.
Prompting can be invoked by entering “Ctrl-P.”
Note
The CTC-TL1 window does not support this feature.
If the prompting tool requires user input, a message “User Input Required” will be displayed. If the
prompting tool is asked for fields that are not supported, a message “Field Not Supported” will be
displayed.
prompting tool is asked for fields that are not supported, a message “Field Not Supported” will be
displayed.
Pattern Matching enables you to enter only the first few characters of a command, or only as many as is
necessary to distinguish the command from others. The prompting tool will return a list of possible
named parameters.
necessary to distinguish the command from others. The prompting tool will return a list of possible
named parameters.
Prompting can be invoked for Named or Positional parameter blocks.
In a GNE to ENE scenario, the GNE prompts the user on behalf of the ENE.
Add or Drop a Cross Connect
The following new commands support adding or dropping a cross connect over a cross connection or a
circuit via TL1.
circuit via TL1.
•
ED-CRS-<STS_PATH>
•
ED-CRS-VT1
J1 and C2 Support
As of Release 4.0.x, the C2 byte can be retrieved using the following commands. Also, J1 STS path trace
can be provisioned on the protect STS path of a switched BLSR.
can be provisioned on the protect STS path of a switched BLSR.
•
ED-<STS_PATH>, RTRV-<STS_PATH>
•
RTRV-PTHTRC-<STS_PATH>
•
RTRV-ALM-<STS_PATH>, RTRV-COND-<STS_PATH>
•
RTRV-PM-<STS_PATH>, RTRV-TH-<STS_PATH>
The RTRV-TRC-<BLSR_OCN> command is introduced with this feature to retrieve all J1 for each
SONET port that has a BLSR and supports the J1 path trace. (In other words, this command can be
applied for the OC-48AS and OC-192 cards only.)
SONET port that has a BLSR and supports the J1 path trace. (In other words, this command can be
applied for the OC-48AS and OC-192 cards only.)
The RTRV-<STS_PATH> command adds a new input field, BLSRPTHTYPE, allowing you to retrieve
the STS J1 path trace information on either the STS path of PCA circuits or the STS path of NON-PCA
circuits.
the STS J1 path trace information on either the STS path of PCA circuits or the STS path of NON-PCA
circuits.