Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Notas de publicación

The RTRV-<STS_PATH> command also adds a new output field, BLSRPTHSTATE. 

As of Release 4.0.x, PCA test access is supported. Creation of an STS (or VT) Test Access point on a 
protect channel of a two-fiber, or four-fiber BLSR is supported. Connecting to an STS or VT PCA circuit 
is also now supported. 

Test access on a PCA will be preempted when a BLSR switch takes place. 

Test Access Intrusive modes (splta, spltb,  loope, loopf, splte, spltf, spltef) are allowed on circuits that 
are IS. The circuit state will be internally changed to OOS_MT during the period the connection is 
maintained. Test Access will then remember and restore the original circuit state once the connection is 
disabled via the DISC-TACC command or a session timeout. 

The following new command has been added for Release 4.0.x.

INIT-REG-G1000 

The STS/VT path AID formats for optical cards (OCn, EC1) have been changed to add the port number 
between the slot number and the STS number. Format differences are as follows.

For STS AID formats: 

Prior to Release 4.0.x, the optical card STS AID format is: 
STS-SlotNumber-RealStsNumber

 

As of Release 4.0.x, the new format is:
STS-SlotNumber-PortNumber-RelativeStsNumber

 

For VT AID formats: 

Prior to Release 4.0.x, the optical card VT AID format is:
VT1-SlotNumber-RealStsNumber-VtGroupNumber-RelativeVtNumber 

As of Release 4.0.x, the new format is:
VT1-SlotNumber-PortNumber-RelativeStsNumber-VtGroupNumber-Relative

 

Additional autonomous messages are reported via the REPT^EVT^SECU message in Release 4.0.x. 

The new messages, available to Superusers only, are: 

COND_SEC_ADMIN_LOCKOUT—an administrator has locked a userid (the userid cannot log 
into the system, but has not been deleted)