Cisco Cisco ONS 15600 Multiservice Switching Platform (MSSP) Guía De Instalación
6
Upgrading the Cisco ONS 15600 to Release 9.2.1
OL-23758-01
DLP- U564 Verify CTC Workstation Requirements
Stop. You have completed this procedure.
NTP-U502 Upgrade the ONS 15600 Software
Caution
Executing an upgrade with a single TSC card is traffic affecting. Do not start an upgrade unless both
TSC cards are present and alarm free.
TSC cards are present and alarm free.
Note
To upgrade the software successfully, read and perform each task that applies to your network in the
proper order.
proper order.
Note
The UPGRADE, SFTWDOWN, and SW-VER alarms are raised during the upgrade process. These
alarms are normal and will clear when the download is complete.
alarms are normal and will clear when the download is complete.
Step 1
Insert the Software R9.2.1.x CD into the workstation CD-ROM (or otherwise acquire access to the
software) to begin the upgrade process.
software) to begin the upgrade process.
SSXC preferred copy
Slot 6/7 or Slot 8/9 (circle one)
Network information; do a print screen from the Provisioning tab
in the network view.
in the network view.
Current configuration: Path Protection, linear, etc. Do print
screens as needed.
screens as needed.
List all protection groups in the system; do a print screen from
the Protection Group window.
the Protection Group window.
List alarms; do a print screen from the Alarm window.
List circuits; do a print screen from the Circuit window.
Table 1
Manually Logged Data (continued)
Item
Record Data Here (If Applicable)
Purpose
This procedure upgrades your software to Software R9.2.1.x.
Tools/Equipment
PC or UNIX workstation; Cisco ONS 15600 Software R9.2.1.x (CD or soft
copy)
copy)
Prerequisite Procedures
(BLSR nodes only) The database must be backed up prior to locking the
BLSR.
BLSR.
Required/As Needed
Required
Onsite/Remote
Onsite or remote (but in the presence of the workstation)
Security Level
Superuser