Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Guía De Instalación

If you want to install a fiber clip on a card already installed in a shelf, you must completely remove 
the OC-N/STM-N card from the shelf. Ensure that the card is not carrying traffic and remove all 
fiber-optic cables before removing the card from the ONS 15454 shelf.

Always use an electrostatic discharge (ESD) wristband when working with a powered ONS 15454. 
Plug the wristband cable into the ESD jack located on the lower-right outside edge of the shelf 
assembly. 

The ONS 15454 ships with three types of fiber clips that can be installed on the faceplate of 
OC-N/STM-N cards, with the exception of 15454_MRC-12 card, which ships with a separate type of 
clips. (See the 

 for more information.)

Install standard fiber clips (52-0616-01) on OC-N cards if the shelf has a standard front door installed. 
Install extended fiber clips (52-0621-01) or adjustable fiber clips (52-0626-01) on OC-N/STM-N cards 
if the shelf has a deep (extended) door (800-25281-01) installed. 

 shows standard, extended, and adjustable fiber clips that can be used with all ONS 15454 cards 

except the 15454_MRC-12.

Prong

Standard fiber clip

(use with standard door)

Extended fiber clip

(use with deep door)

Adjustable fiber clip

(use with deep door)

134820