Cisco Cisco Wireless Services Module 2 (WiSM2) Notas de publicación
20
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 7.4.100.0
OL-28134-01
Interoperability With Other Clients in 7.4.100.0
Upgrading from an LDPE to a Non-LDPE Controller
Step 1
Download the non-LDPE software release:
a.
Go to the Cisco Software Center at this URL:
b.
Choose the controller model from the right selection box.
c.
Click Wireless LAN Controller Software.
d.
From the left navigation pane, click the software release number for which you want to install the
non-LDPE software.
non-LDPE software.
e.
Choose the non-LDPE software release: AIR-X-K9-X-X.X.aes
f.
Click Download.
g.
Read Cisco’s End User Software License Agreement and then click Agree.
h.
Save the file to your hard drive.
Step 2
Copy the controller software file (filename.aes) to the default directory on your TFTP or FTP server.
Step 3
Upgrade the controller with this version by following the instructions from
through
detailed in the
.
Interoperability With Other Clients in 7.4.100.0
This section describes the interoperability of the version of controller software with other client devices.
describes the configuration used for testing the clients.
lists the client types on which the tests were conducted. The clients included laptops, handheld
devices, phones, and printers.
Table 5
Test Bed Configuration for Interoperability
Hardware/Software Parameter
Hardware/Software Configuration Type
Release
7.4.100.0
Controller
Cisco 5500 Series Controller
Access points
1131, 1142, 1242, 1252, 3500e, 3500i, and 3600
Radio
802.11a, 802.11g, 802.11n2, 802.11n5
Security
Open, WEP, PSK (WPA and WPA2), 802.1X
(WPA-TKIP and WPA2-AES) (LEAP, PEAP,
EAP-FAST, EAP-TLS)
(WPA-TKIP and WPA2-AES) (LEAP, PEAP,
EAP-FAST, EAP-TLS)
RADIUS
ACS 4.2, ACS 5.2
Types of tests
Connectivity, traffic, and roaming between two
access points
access points