Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP) Guía De Instalación
5
Installing ONS 15454 SDH FMEC-E3/DS3 Cards
78-14310-01
Installation Procedures
Figure 3
Installing an FMEC card in an ONS 15454 SDH
Card Turn Up
Follow the steps in this section to verify card turn up. If one or more of the Cisco Transport Controller
(CTC) software screen conditions according to
(CTC) software screen conditions according to
are not met, re-install the card. Replace the unit if the faulty state persists.
Verify Successful Turn Up of the FMEC-E3/DS3 Card
Step 1
Verify that power is applied to the shelf assembly.
Step 2
Verify that the FMEC-E3/DS3 card has been installed in the correct slot (Slot 18 to 22 or 25 to 29, for
the E3-12 or DS3I-N-12 card in slot 1 to 5 or 13 to 17, respectively).
the E3-12 or DS3I-N-12 card in slot 1 to 5 or 13 to 17, respectively).
Step 3
Verify that the card appears in the correct slot on the CTC software screen.
Step 4
Verify that the card is white on the CTC software screen.
Step 5
Verify that the card is shown in Inventory on the CTC software screen.
61338
FAN
FAIL
CRIT
MAJ
MIN
Mounting screws
Guide rail