Cisco Cisco Web Security Appliance S170 Guía Del Usuario
2-9
Cisco IronPort AsyncOS 7.7.5 for Web User Guide
Chapter 2 Using the Web Security Appliance
Committing and Clearing Changes
Committing and Clearing Changes
When you change the configuration of the Web Security appliance, you must commit the changes before
they go into effect. Or, you can choose to clear the changes you have made if you do not want to commit
them. How you commit and clear changes depends on the interface you use:
they go into effect. Or, you can choose to clear the changes you have made if you do not want to commit
them. How you commit and clear changes depends on the interface you use:
•
Web interface
•
Command Line Interface
When you commit some Web Security appliance configuration changes, the Web Proxy must restart for
the changes to take effect. For more information, see
the changes to take effect. For more information, see
.
Committing and Clearing Changes in the Web Interface
Commit changes using the Commit Changes button in the upper right corner of the web interface. You
can make multiple configuration changes before you commit all of them. When you make a change, the
Commit Changes button color is yellow and the button text changes to “Commit Changes” as shown in
can make multiple configuration changes before you commit all of them. When you make a change, the
Commit Changes button color is yellow and the button text changes to “Commit Changes” as shown in
.
Figure 2-1
The Commit Button: Changes Pending
When there are no changes to commit, the button color is gray and the button text is “No Changes
Pending.”
Pending.”
shows the web interface when there are no changes to commit.
Figure 2-2
The Commit Button: No Changes Pending
You also use the Commit Changes button to clear the changes made since the last commit or clear.
Committing Changes in the Web Interface
Step 1
Click the Commit Changes button.
Step 2
Enter comments in the Comment field if you choose.
Step 3
Click Commit Changes.
Clearing Changes in the Web Interface
Step 1
Click the Commit Changes button.
Step 2
Click Abandon Changes.