Cisco Cisco Email Security Appliance C170 Guía De Instalación

To replace or install a hot-pluggable hard drive, follow these steps:

You do not have to shut down or power off the appliance to replace hard drives because they are 
hot-pluggable.

Remove the drive that you are replacing or remove a blank drive tray from an empty bay:

Press the release button on the face of the drive tray. See 

.

Grasp and open the ejector lever and then pull the drive tray out of the slot.

Install a new drive:

With the ejector lever on the drive tray open, insert the drive tray into the empty drive bay.

Push the tray into the slot until it touches the backplane, then close the ejector lever to lock the drive 
in place.

You cannot use most of the slots for the hard drives. To see the maximum number of hard drives 
supported for each specific model, refer to the 

. When you replace a drive, you must use the same slot as the drive that you replaced.

You can contact support using one of the following methods:

Cisco IronPort Support: 

U.S. Toll-Free Number: 1-800-553-2447 or 1-408-526-7209

http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html

Release button

Ejector lever