Cisco Cisco NSS030 Smart Storage External Power Adapter Manual De Mantenimiento
Getting Started
Mapping a Network Drive
Cisco Small Business NSS300 Series Smart Storage Administration Guide
33
2
This is the default static IP address if DHCP is not enabled. If the NAS device does
not have a static IP address and if the device is not able to receive an IP address
via DHCP, it will default to 192.168.1.50. If the DHCP server on your network is
enabled, as soon as the DHCP server responds, the NAS device will accept an IP
address even if the default static IP address is assigned.
not have a static IP address and if the device is not able to receive an IP address
via DHCP, it will default to 192.168.1.50. If the DHCP server on your network is
enabled, as soon as the DHCP server responds, the NAS device will accept an IP
address even if the default static IP address is assigned.
NOTE
If your operating system is Linux, refer to the LCD display on the front panel of the
NAS device and configure the IP address to match the network. The LCD display is
located on the NSS324 and NSS326.
NAS device and configure the IP address to match the network. The LCD display is
located on the NSS324 and NSS326.
STEP 4
Follow the prompts to complete the configuration.
Continue to
.
Mapping a Network Drive
You can map a network drive either by using the Setup Wizard or from Windows.
Mapping a Network Drive from the Setup Wizard
NOTE
Skip steps 1-5 if you are already on the Map Network Drive window in the Setup
Wizard.
Wizard.
To map a network drive from the Setup Wizard:
STEP 1
Insert the product CD and from the Welcome window, click NSS322, NSS324, or
NSS326 depending on which NAS device you are installing. The Setup Menu
window opens.
NSS326 depending on which NAS device you are installing. The Setup Menu
window opens.
STEP 2
Under First Time Installation, click Setup. The First Time Installation Wizard
window opens.
window opens.
STEP 3
Click Next to launch the wizard. The End-User License Agreement window
opens.
opens.
STEP 4
To accept the End-User License Agreement, check the I accept this agreement
check box and click Next. The Hardware Installation Guide window opens.
check box and click Next. The Hardware Installation Guide window opens.
STEP 5
Click Skip until you reach the Map Network Drive window.