Cisco Cisco NSS030 Smart Storage External Power Adapter 维护手册

Mapping a Network Drive

Cisco Small Business NSS300 Series Smart Storage Administration Guide

33

 

This is the default static IP address if DHCP is not enabled. If the NAS device does 
not have a static IP address and if the device is not able to receive an IP address 
via DHCP, it will default to 192.168.1.50. If the DHCP server on your network is 
enabled, as soon as the DHCP server responds, the NAS device will accept an IP 
address even if the default static IP address is assigned.

If your operating system is Linux, refer to the LCD display on the front panel of the 
NAS device and configure the IP address to match the network. The LCD display is 
located on the NSS324 and NSS326.

Follow the prompts to complete the configuration.

Continue to 

.

You can map a network drive either by using the Setup Wizard or from Windows.

Skip steps 1-5 if you are already on the Map Network Drive window in the Setup 
Wizard.

To map a network drive from the Setup Wizard:

Insert the product CD and from the Welcome window, click NSS322, NSS324, or 
NSS326 depending on which NAS device you are installing. The Setup Menu 
window opens.

Under First Time Installation, click Setup. The First Time Installation Wizard 
window opens.

Click Next to launch the wizard. The End-User License Agreement window 
opens.

To accept the End-User License Agreement, check the I accept this agreement 
check box and click Next. The Hardware Installation Guide window opens.

 Click Skip until you reach the Map Network Drive window.