Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica

Use the RTRV-ALM-T1 command to retrieve all alarms on a specific E1 port. The RTRV-ALM-T1 
command is listed as RTRV-ALM-<MOD2ALM> in the Cisco ONS SONET TL1 Command Guide. 
T1 is just one of the options you can enter. RTRV-ALM-T1 is from the Fault category.

RTRV-ALM-<MOD2ALM>:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],[<CONDTYPE>],[<SRVEF
F>][<LOCN>],[<DIRN>][,];

TID is the name of the node you want to access. If you only want to query the node you connected 
to leave the TID blank.

AID is the access identifier to indicate slot and port.

CTAG is any non-blank character series that does not have to be unique.

NTFCNCDE is the 2-letter notification code. Values are CL (cleared), CR (critical), MJ (major), 
MN (minor), NA (not alarmed), and NR (not reported).

CONDTYPE is the alarm condition.

SRVEFF is the effect on service caused by the alarm condition. Values are NSA (not service 
affecting) or SA (service affecting).

LOCN is the location associated with a particular command.

DIRECTION is the PM count retrieval direction.

RTRV-ALM-OC12:ELDRIDGE:FAC-5-1:225::MN,SD,SA,NEND,RCV;

   SID DATE TIME 
M    CTAG COMPLD
“<AID>,[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,[<OCRDAT>],[<OCRTM>],[<L
OCN>],[<DIRN>]:[<DESC>]”
;

AID shows the port in question.

AIDTYPE shows the type of the port.

NTFCNCDE is the 2-letter notification code. Values are CL (cleared), CR (critical), MJ (major), 
MN (minor), NA (not alarmed), and NR (not reported).

CONDTYPE is the type of alarm condition.

SRVEFF is the effect on service caused by the alarm condition. Values are NSA (not service 
affecting) or SA (service affecting).

OCRDAT is the date when the specific event or violation occurred.

OCRTM is the time when the specific event or violation occurred.

LOCN is the location associated with a particular command.