Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica

Use the RTRV-T1 command to retrieve configuration information on a DS1 port. RTRV-T1 is from 
the Ports category.

RTRV-T1:[<TID>]:<AID>:<CTAG>[::::];

TID is the name of the node you want to access. If you only want to query the node you connected 
to leave the TID blank.

AID is the access identifier to indicate slot and port.

CTAG is any non-blank character series that does not have to be unique.

RTRV-T1:TID:FAC-2-1:1223;

   SID DATE TIME
M  CTAG COMPLD
“<AID>::[LINECDE=<LINECDE>],[FMT=<FMT>],[LBO=<LBO>],[TACC=<TAP>],[TAPTYPE=<TA
PTYPE>],[SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>],[SFBER=<SFBER>],[SDBER=<SDBER>],[
NAME=<NAME>],[SYNCMSG=<SYNCMSG>],[SENDDUS=<SENDDUS>],[RETIME=<RETIME>],
[AISONLPBK=<AISONLPBK>],[AISVONAIS=<AISVONAIS>],[AISONLOF=<AISONLOF>],[MOD
E=<MODE>],[SYNCMAP=<SYNCMAP>],[ADMSSM=<ADMSSM>],[PROVIDESYNC=<PROVIDE
SYNC>],[VTMAP=<VTMAP>],[INHFELPBK=<INHFELPBK>],[BERTMODE=<BERTMODE>],[BE
RTPATTERN=<BERTPATTERN>],[BERTERRCOUNT=<BERTERRCOUNT>],[BERTERRRATE=<
BERTERRRATE>],[BERTSYNCSTATUS=<BERTSYNCSTATUS>]:<PST>,[<SST>]”
;

AID is the access identifier to indicate slot and port.

LINECDE is a line code. Values are AMI or B8ZS.

FMT is a frame format. Values are D4, ESF, or unframed.

LBO is a line build out. Values are 0-131, 132-262, 263-393, 394-524, or 525-655.

TAP defines the STS as a test access port with a selected unique TAP number. The TAP number is 
in the range of 0, 1–999. When TACC is 0 (zero), the TAP is deleted.

TAPTYPE is the test access point type. Values are DUAL or SINGLE.

SOAK - IS-AINS to IS transition soak time as measured in 15 minute intervals, so a value of 4 
translates to a soak time of 1 hour. The allowable range is 0–192 intervals (maximum of 48 hours).

SOAKLEFT is the time remaining for the transition from OOS-AINS to IS measured in 1 minute 
intervals.

SFBER identifies port SFBER; valid values are 1E-3, 1E-4 or 1E-5.

SDBER identifies port SDBER; valid values are 1E-5, 1E-6,...1E-9.

NAME is the name.