Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Guía Del Usuario
2
StartCTC Application Guide
78-xxxxx-xx
Using StartCTC
Step 2
Make sure to select the Custom installation (not the Typical installation) and unselect any browser from
the list in the Java plug-ins installation step.
the list in the Java plug-ins installation step.
Step 3
Insert the Cisco ONS Software Release 8.0 CD into your CD drive.
Step 4
Navigate to the CtcLauncher directory.
Step 5
Copy the StartCTC.exe file to your local hard drive. Any location that is convenient for you to access,
such as the Windows desktop, may be used.
such as the Windows desktop, may be used.
Stop. You have completed this procedure.
Using StartCTC
You can use StartCTC to connect to ONS NEs that have an IP connection to the CTC computer without
using a web browser. To use this connection option, the following prerequisites must be met:
using a web browser. To use this connection option, the following prerequisites must be met:
•
The StartCTC application file, StartCTC.exe, must be copied from the ONS software CD to the CTC
computer. (See the
computer. (See the
•
The ONS NEs must be running CTC Software Release 3.3 or higher.
•
The CTC Software Release 8.0 Java Archive (JAR) files must be on the CTC computer. CTC JAR
files are downloaded to your computer when one of the following occurs:
files are downloaded to your computer when one of the following occurs:
–
You connect to a Software R8.0 NE using a web browser.
–
You use the LDCACHE utility on a Software R8.0 software CD to copy the JAR files to the CTC
computer.
computer.
Connect to ONS NEs with an IP Connection
Use the following steps to connect to an ONS NE that has an IP connection to the CTC computer. Before
you begin, verify the following:
you begin, verify the following:
•
The ONS NE is running CTC Software R3.3 or higher.
•
The CTC Software Release 8.0 JAR files have been downloaded to your CTC computer through one
of the following:
of the following:
–
You connected to a Software R8.0 NE using a web browser.
–
You used the LDCACHE utility on a Software R8.0 CD to copy the JAR files to the CTC
computer.
computer.
Step 1
If the StartCTC application has not been installed, complete the
. Otherwise, continue with
Step 2
Navigate to the directory containing the StartCTC.exe file and double-click it. (You can also use the
Windows Start menu Run command.)
Windows Start menu Run command.)
Step 3
Enter the IP address of the desired ONS NE node in the Use IP Node under Connection Mode. (If the
address was entered previously, you can choose it from the drop-down list.)
address was entered previously, you can choose it from the drop-down list.)
Step 4
If the NE node that you are connecting to is using a different software version than 8.0, select the
version in the CTC Version Selection dialog box. It is recommended to always use the Same version as
the login node" unless the use of newer CTC versions is desired.
version in the CTC Version Selection dialog box. It is recommended to always use the Same version as
the login node" unless the use of newer CTC versions is desired.