Cisco Cisco NSS030 Smart Storage External Power Adapter Notas de publicación

Release Notes for Cisco NSS300 Series Smart Storage Transition From Firmware Version 1.5 to QNAP Version 3.5

3

Prior to upgrading to the QNAP firmware, upgrade your NSS300 Series Smart 
Storage device to the latest Cisco firmware verison 1.5.0. Then upgrade to QNAP 
firmware 3.5.0 before upgrading to any higher version of QNAP firmware. Cisco 
only supports upgrading to QNAP firmware version 3.5.0 or within QNAP firmware 
versions 3.5.x.

http://www.qnap.com/cisco

 and download the latest QNAP firmware

version 3.5.0.

Download the correct firmware for your model. The table below shows the correct 
base model references for the NSS300 Series Smart Storage devices.

After downloading the QNAP firmware, you need to unzip the files. The NSS 
upgrade will NOT take a .zip or .dmg file. When you unzip the files, you will have
an .img file. For example, TS-459_3.5.0_Build0815.img (Cisco NSS324 is QNAP  
TS-459Pro+).

Continue to 

After you migrate a NSS300 Series Smart Storage device to the QNAP firmware, 
you are unable to reverse the transition back to Cisco firmware.

This procedure describes how to upgrade the firmware on the NSS300 Series 
Smart Storage devices from the Network Attached Storage (NAS) interface.

From the Administration > Firmware Upgrade window, you can view the current 
firmware version and update the firmware on the NAS. The current NAS settings 
will not change while performing the firmware version update.

TS-259 Pro+

TS-459 Pro+

TS-659 Pro+