Cisco Cisco Catalyst 6000 Multilayer Switch Feature Card MSFC2 Guía De Instalación
3
Installing Power Boards in Cisco Ethernet Switch Network Modules
78-14282-02
Adding an Optional Power Board
Warning
Do not connect the external power supply cable to the power connector on the front of the network
module until the network module has been inserted into the router chassis. To see translations of
the warnings that appear in this publication, refer to the Regulatory Compliance and Safety
Information document that accompanied this device.
module until the network module has been inserted into the router chassis. To see translations of
the warnings that appear in this publication, refer to the Regulatory Compliance and Safety
Information document that accompanied this device.
Step 7
After installing the network module into the chassis, connect the power cable to the power module
connector on the front of the network module. See the Cisco External Power Supply for Cisco Ethernet
Switch Network Modules Installation Guide for more information.
connector on the front of the network module. See the Cisco External Power Supply for Cisco Ethernet
Switch Network Modules Installation Guide for more information.
Figure 2
Installing a Power Board in a 16-Port Ethernet Switch Network Module
EN
NM-
ESW-
16
ESW-
16
15x
7x
14x
6x
13x
5x
FastEthernet Ports
12x
4x
11x
3x
10x
2x
9x
1x
8x
0x
Ext
Pwr
-48V
0x
8x
7x
15x
GE
10/100/
1000
Base-Tx
62350