Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP) Guía De Instalación
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
3
Upgrading Cisco ONS 15454 SDH Release 3.x to Release 4.0.x Using the TCC-I Card
June 2003
NTP-U11 Prepare for Release 3.x to Release 4.0.x Upgrade
DLP-U17 Verify the CTC PC or UNIX Workstation
Step 1
Ensure that your workstation is one of the following:
•
IBM-compatible PC with a Pentium or higher processor, CD-ROM drive, and 128 MB RAM running
Windows 95, Windows 98, Windows 2000, Windows NT (with service pack 4 or higher), or
Windows XP
Windows 95, Windows 98, Windows 2000, Windows NT (with service pack 4 or higher), or
Windows XP
•
UNIX workstation running Solaris 2.5.x or 2.6.x.
Check your web browser software version and use one of the following:
•
Netscape Navigator 4.73 or higher (Netscape Navigator is included on the ONS 15454 SDH
software CD shipped with the node)
software CD shipped with the node)
•
Netscape Communicator 4.61 or higher
•
Internet Explorer 4.0.x Service Pack 2 or higher
Step 2
Verify the following:
•
The Java Version installed on your computer is Java Runtime Environment (JRE) Release 1.3.1_02.
You can check this on your browser window after entering the node IP address in the URL window
under Java Version.
You can check this on your browser window after entering the node IP address in the URL window
under Java Version.
•
The Java Policy file is installed on your computer.
Note
If you need to install either the JRE 1.3.1_01 or the Java Policy file, they are included on the
ONS 15454 SDH software CD. For detailed installation instructions, refer to the Cisco ONS
SDH 15454 Procedure Guide.
ONS 15454 SDH software CD. For detailed installation instructions, refer to the Cisco ONS
SDH 15454 Procedure Guide.
Note
If you must later revert to a release that can use a previous version of JRE, you will need to
reinstall Java and delete the JAR files from your PC or workstation’s system temp directory after
reverting all of the nodes in the network. You can find the appropriate JRE version on the older
Cisco software CD. If you are currently running a release that is also compatible with JRE
1.3.1_02, the extra steps are not necessary.
reinstall Java and delete the JAR files from your PC or workstation’s system temp directory after
reverting all of the nodes in the network. You can find the appropriate JRE version on the older
Cisco software CD. If you are currently running a release that is also compatible with JRE
1.3.1_02, the extra steps are not necessary.
Step 3
Return to the
.
Purpose
Before upgrading the software to R4.0.x, verify all PC or UNIX
workstation hardware and software requirements.
workstation hardware and software requirements.
Tools/Equipment
PC or UNIX workstation
Prerequisite Procedures
None
Required/As Needed
Required
Onsite/Remote
Onsite or remote (but in the presence of a PC or UNIX workstation)
Security Level
Superuser