Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP) Guía De Instalación
17
Upgrading Cisco ONS 15454 SDH R4.x to R4.1.x Using the TCC2 Card
OL-4295-02
DLP-U115 Manually Restore the Database
DLP-U115 Manually Restore the Database
Caution
Do not perform these steps unless the software revert failed.
Caution
This process is service affecting and should be performed during a maintenance window.
Step 1
In the CTC node view, click the Maintenance > Database tabs.
Step 2
Click Restore. The Open dialog box appears.
Step 3
Select the previously saved file and choose Open.
The database is restored and the TCC2 cards reboot.
Step 4
When the TCC2 cards have rebooted, log back into CTC and verify that the database is restored.
Wait one minute before restoring the next node.
Step 5
Repeat Steps
for each node in the network.
You have now completed the manual database backup.
Step 6
Return to your originating procedure (NTP).
Related Documentation
Release-Specific Documents
•
Release Notes for the Cisco ONS 15454 SDH, Release 4.1.x
•
Release Notes for the Cisco ONS 15327, Release 4.1.x
•
Release Notes for the Cisco ONS 15454, Release 4.1.x
Platform-Specific Documents
•
Cisco ONS 15454 SDH Procedure Guide, Release 4.1 and 4.5
•
Cisco ONS 15454 SDH Reference Guide, Release 4.1 and 4.5
Purpose
This task manually restores the database. Use this task if you were unable
to perform a revert successfully and need to restore the database.
to perform a revert successfully and need to restore the database.
Tools/Equipment
PC or UNIX workstation
Prerequisite Procedures
(if required)
Required/As Needed
As needed
Onsite/Remote
Onsite or remote (but in the presence of the workstation)
Security Level
Superuser