Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP) Guía De Instalación

If you have multiple ONS 15454 SDH nodes configured in the same IP subnet, ensure that only one is 
connected to a router. Otherwise, the remaining nodes might be unreachable. Refer to the 
Cisco ONS 15454 SDH Reference Manual for LAN-connection suggestions.

Return to your originating procedure (NTP).

In CTC node (default) view, ensure that TCC2 cards are installed in Slots 7 and 11 and that the XC10G, 
XC-VXL-10G, or XC-VXL-2.5G cross-connect cards are installed in Slots 8 and 10. Software R4.x does 
not support simplex operation.

Repeat 

 at every node in the network.

Return to your originating procedure (NTP).

Log into CTC. For detailed instructions, refer to the Cisco ONS 15454 SDH Procedure Guide. If you are 
already logged in, continue with 

In the node (default) view, click the Maintenance > Database tabs.

Click Backup.

This task checks for duplex common control cards. The node must have 
two TCC2 cards and two XC10G, XC-VXL-10G, or XC-VXL-2.5G cards.

PC or UNIX workstation with CTC installed

DLP-U106 Verify CTC PC or UNIX Workstation Requirements, page 3
DLP-U72 Verify the LAN Connections, page 4

Required

Onsite or remote (but in the presence of a PC or UNIX workstation)

Superuser

This procedure preserves all configuration data for your network before 
performing the upgrade.

PC or UNIX workstation

Required

Onsite or remote (but in the presence of the workstation)

Superuser