Cisco Cisco Wireless Services Module 2 (WiSM2) Notas de publicación
21
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 7.6.120.0
OL-30342-03
Interoperability With Other Clients in Release 7.6.120.0
After the installation of the DTLS license, reboot the system. Ensure that the DTLS license that is
installed is active.
installed is active.
Upgrading from an LDPE to a Non-LDPE Cisco WLC
Step 1
Download the non-LDPE software release:
a.
Go to the Cisco Software Center at this URL:
b.
Choose the Cisco WLC model.
c.
Click Wireless LAN Controller Software.
d.
In the left navigation pane, click the software release number for which you want to install the
non-LDPE software.
non-LDPE software.
e.
Choose the non-LDPE software release: AIR-X-K9-X-X.X.aes
f.
Click Download.
g.
Read the Cisco End User Software License Agreement and then click Agree.
h.
Save the file to your hard drive.
Step 2
Copy the Cisco WLC software file (filename.aes) to the default directory on your TFTP server or FTP
server.
server.
Step 3
Upgrade the Cisco WLC with this version by performing
through
detailed in the
Interoperability With Other Clients in Release 7.6.120.0
This section describes the interoperability of Release 7.6.120.0 of the Cisco WLC software with other
client devices.
client devices.
describes the configuration used for testing the clients.
Table 6
Test Bed Configuration for Interoperability
Hardware/Software Parameter
Hardware/Software Configuration Type
Release
7.6.120.0
Cisco WLC
Cisco 5500 Series Controller
Access points
1131, 1142, 1242, 1252, 3500e, 3500i, 3600,
3702, 2702, 702W
3702, 2702, 702W
Radio
802.11ac, 802.11a, 802.11g, 802.11n2, 802.11n5
Security
Open, WEP, PSK (WPA and WPA2), 802.1X
(WPA-TKIP and WPA2-AES) (LEAP, PEAP,
EAP-FAST, EAP-TLS)
(WPA-TKIP and WPA2-AES) (LEAP, PEAP,
EAP-FAST, EAP-TLS)