Cisco Cisco Wireless Services Module 2 (WiSM2) Notas de publicación

Fragmented pings on any interface

Right-to-Use Licensing

Cisco 5508 WLC cannot function as mobility controller (MC). However, Cisco 5508 WLC can 
function as guest anchor in a New Mobility environment.

Smart Licensing

Static AP-manager interface

For Cisco Flex 7500 Series WLCs, it is not necessary to configure an AP-manager interface. 
The management interface acts as an AP-manager interface by default, and the access points 
can join on this interface.

TrustSec SXP

IPv6 and Dual Stack client visibility

IPv6 client bridging and Router Advertisement Guard are supported.

Internal DHCP server

Access points in local mode

An AP associated with the Cisco WLC in the local mode should be converted to the FlexConnect 
mode or monitor mode, either manually or by enabling the autoconvert feature. On the Cisco 
Flex 7500 WLC CLI, enable the autoconvert feature by entering the config ap autoconvert 
enable command.

Mesh (use Flex + Bridge mode for mesh-enabled FlexConnect deployments)

Spanning Tree Protocol (STP)

Cisco Flex 7500 Series WLC cannot be configured as a guest anchor Cisco WLC. However, it can 
be configured as a foreign Cisco WLC to tunnel guest traffic to a guest anchor Cisco WLC in a DMZ.

Multicast

FlexConnect local-switched multicast traffic is bridged transparently for both wired and wireless 
on the same VLAN. FlexConnect access points do not limit traffic based on Internet Group 
Management Protocol (IGMP) or MLD snooping.

PMIPv6

Smart Licensing