Cisco Cisco Wireless Services Module 2 (WiSM2) Notas de publicación
31
Release Notes for Cisco Wireless Controllers and Lightweight Access Points for Cisco Wireless Release 8.2.110.0 and 8.2.111.0
Features Not Supported on Cisco Access Point Platforms
Features Not Supported on Cisco 5520, 8510, and 8540 WLCs
•
Internal DHCP Server
•
Mobility controller functionality in converged access mode
Note
Smart Licensing is not supported on Cisco 8510 WLC.
Features Not Supported on Cisco Virtual WLCs
•
Cisco Aironet 1850 and 1830 Series APs
•
Internal DHCP server
•
TrustSec SXP
•
Access points in local mode
•
Mobility/Guest Anchor
•
Multicast
Note
FlexConnect local-switched multicast traffic is bridged transparently for both wired and wireless on the
same VLAN. FlexConnect access points do not limit traffic based on IGMP or MLD snooping.
same VLAN. FlexConnect access points do not limit traffic based on IGMP or MLD snooping.
•
High Availability
•
PMIPv6
•
EoGRE (Supported in only local switching mode)
•
Workgroup Bridges
•
Client downstream rate limiting for central switching
•
SHA2 certificates
Features Not Supported on Mesh Networks
•
Load-based call admission control (CAC). Mesh networks support only bandwidth-based CAC or
static CAC
static CAC
•
High availability (fast heartbeat and primary discovery join timer)
•
AP acting as supplicant with EAP-FASTv1 and 802.1X authentication
•
Access point join priority (mesh access points have a fixed priority)
•
Location-based services
Features Not Supported on Cisco Access Point Platforms
•