Cisco Cisco Video Surveillance 2000 IP Dome Notas de publicación
5
Release Notes for Cisco Video Surveillance IP Camera and IP Dome Firmware Release 2.4.0
OL-26257-01
Caveats
Step 6
In the Open pop-up window, take these actions:
a.
Navigate to the folder in which you unzipped the release 2.4.0 firmware file.
b.
Click the firmware name, which is CIVS-IPC-2421-25XX-V2.4.0-10.bin.gz.
c.
Click Open.
The Cisco Upgrade Utility for Standard Definition IP Camera window displays the number of the
firmware release that you are upgrading to.
firmware release that you are upgrading to.
Step 7
In the Cisco Upgrade Utility for Standard Definition IP Camera window, click the Start button.
The upgrade process begins. This process can take up to 30 minutes. Do not exit the program or power
off the IP camera during the upgrade process.
off the IP camera during the upgrade process.
You can monitor the process by looking at the Status, Progress, and % fields in the Cisco Upgrade Utility
for Standard Definition IP Camera window. When the upgrade process completes, the Status field
displays OK.
for Standard Definition IP Camera window. When the upgrade process completes, the Status field
displays OK.
Step 8
In the Cisco Upgrade Utility for Standard Definition IP Camera window, click the Exit button.
Each IP camera that you are upgrading reboots and resets to the factory default configuration values.
Step 9
Access each IP camera that you upgraded and configure it as needed.
See Cisco Video Surveillance IP Camera User Guide for detailed information and instructions about
accessing and configuring an IP camera.
accessing and configuring an IP camera.
Caveats
describes the caveats that were resolved in this release.
describes open caveats.
Table 1
Caveats Resolved in this Release
Identifier
Description
CSCte93202
NTP Sydney timezone does not adjust for daylight saving time
CSCtj39462
Malformed RTSP packet crashes IP camera
CSCtj87410
Displays restricted file.cgi files that should not be available in UI
CSCtq47476
SD: Enhancement to camera process monitoring
CSCts16249
SD camera not responsive in some cases using VSM for upgrade/downgrade
Table 2
Caveats Open in this Release
Identifier
Description
CSCte67040
Web UI PTZ command intermittently does not execute in order
CSCte76856
QoS (DSCP) marking configuration change may not take effect until streaming is
restarted
restarted
CSCtg01579
Standard definition camera does not support contrast controls
CSCtg14851
SD camera “Sync with PC” function does not inherit DST setting
CSCtr52188
Camera Upgrade Utility cannot discover SD cameras running 2.4.0