Cisco Cisco Unified MeetingPlace Audio Server Manual De Mantenimiento
4-54
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Configuring the system
Step 3
Type the port number and press Enter. In this example, it is port 0, so type
0
and press Enter. The rest
of
appears.
Step 4
Enter the number of the port group and press Enter. In this example, it is port group 0, so enter
0
and
press Enter.
Note
If you would like to copy this port record to other ports, refer to
.
Step 5
Type
x
and press Enter to exit the “port” utility.
Copying port records
Copying port records provides an easy way to copy the port record for one port to as many ports as
desired. Follow these steps to do this:
desired. Follow these steps to do this:
Step 1
If you are not already accessing the “port” command, at the tech$ prompt, type
port
and press Enter.
See
.
Figure 4-60 Copying Port Records
Step 2
Type
3
and press Enter to copy port records.
Step 3
Enter the port number you want to copy from and press Enter, as shown in line 14 of “” on
page <$chapnum54. In this example, it is port 0, so type
page <$chapnum54. In this example, it is port 0, so type
0
and press Enter.
meetingplace:tech$ port
MeetingPlace is up
***** P O R T / G R O U P C O N F I G M E N U *****
1) View port record(s)
2) Modify port record
3) Copy port records
4) View group record(s)
5) Modify group record
x) Exit program
Enter command: 3
Enter port record number to copy from [0..959] : 0
Enter port(s) to copy to [0-959] : 1-959
Copied to port record(s) 1-959.
Enter command: x