Cisco Cisco Unified MeetingPlace Audio Server Manual De Mantenimiento
4-77
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Configuring the system
Figure 4-79 Setting IP Address for 23 T1 PRI and 120 IP Ports
Step 7
Type the correct slot number for the blade you want to modify and press Enter. In this configuration, it
is slot 16 so type
is slot 16 so type
16
and press Enter.
Step 8
Continue pressing Enter until you are prompted to enter the IP address as in line 15 of
Step 9
Enter the correct IP address and continue pressing Enter until you are prompted with the “blade”
configuration menu.
configuration menu.
Step 10
Verify that the IP address was changed correctly by typing
1
and pressing Enter to view the blade details.
When prompted, type the slot number for the blade you want to see.
Step 11
If it is correct, type
x
and press Enter to exit the program. If not, repeat the steps above.
***** B L A D E C O N F I G M E N U *****
1) View blade details
2) Modify blade
x) Exit program
Enter command: 2
Enter blade slot [1..16]: 16
Type [IP]:
Card Type [ TP1610]:
Port Group [ 1]:
Number of Ports [480]:
1st Port [ 480]:
IP address [0] [0.0.0.0]: 10.10.10.10
IP address [1] [0.0.0.0]: 10.10.10.11
Subnet Mask [0.0.0.0]: 255.255.255.0
Default Gateway [0.0.0.0]: 10.10.10.1
Base UDP Port [0] [ 5000]:
Base UDP Port [1] [ 6000]:
Jitter Buffer Minimum Size [ 100]:
Jitter Buffer Optimization [ 7]:
IP Precedence [0]:
Type of Service (TOS) [ 0]:
DSCP / DiffServ [unused]:
RTCP Interval [default]: