Cisco Cisco Unified MeetingPlace Audio Server Guía De Instalación
Database planning 4-53
February 27, 2004
Cisco MeetingPlace Audio Server Installation Planning Guide
Worksheet 4-10 Network management information
Network management information controls high-level access to the
MeetingPlace SNMP module and allows MeetingPlace to exchange SNMP
data with the rest of your network.
MeetingPlace SNMP module and allows MeetingPlace to exchange SNMP
data with the rest of your network.
Use the following worksheet to plan the network management information
fields.
fields.
N
OTE
For
Options/Field size
values, in most cases the numeric and
alphanumeric ranges given are the number of acceptable digits or characters
for the field. (For example, Numeric—0 to 9 means that the field accepts any
number between 0 (or nil) and 999999999.) Ranges with an asterisk (*) mean
that the field accepts an actual number that falls within that range. (For
example, Numeric—1 to 32767 means that the field accepts the value 3102
but not 32769.)
for the field. (For example, Numeric—0 to 9 means that the field accepts any
number between 0 (or nil) and 999999999.) Ranges with an asterisk (*) mean
that the field accepts an actual number that falls within that range. (For
example, Numeric—1 to 32767 means that the field accepts the value 3102
but not 32769.)
Field
Description
Default
Options/
Field size
Field size
Value
Port number
UDP port on which
MeetingPlace listens for
incoming SNMP messages.
MeetingPlace listens for
incoming SNMP messages.
Recommended: Default value
(port 161) unless you know that
your network management
software uses a different port
number.
(port 161) unless you know that
your network management
software uses a different port
number.
Port 161
Numeric—
Use default
value
Use default
value
System contact
SNMP MIB II system contact.
This value can be set through
your SNMP management
workstation.
your SNMP management
workstation.
System
contact
un-
known
contact
un-
known
Alphanumeric
—1 to 256*
—1 to 256*
System location
SNMP MIB II system location.
This value can be set through
your SNMP management
workstation.
your SNMP management
workstation.
System
contact
un-
known
contact
un-
known
Alphanumeric
—1 to 256*
—1 to 256*
Disable SNMP
Queries?
Queries?
Allows all queries to be
disabled, without affecting
traps, for higher security.
disabled, without affecting
traps, for higher security.
No
Yes/No