Cisco Cisco Unified MeetingPlace Audio Server Installation Guide

Network management information controls high-level access to the 
MeetingPlace SNMP module and allows MeetingPlace to exchange SNMP 
data with the rest of your network.

Use the following worksheet to plan the network management information 
fields.

For 

 values, in most cases the numeric and 

alphanumeric ranges given are the number of acceptable digits or characters 
for the field. (For example, Numeric—0 to 9 means that the field accepts any 
number between 0 (or nil) and 999999999.) Ranges with an asterisk (*) mean 
that the field accepts an actual number that falls within that range. (For 
example, Numeric—1 to 32767 means that the field accepts the value 3102 
but not 32769.)

Port number

UDP port on which 
MeetingPlace listens for 
incoming SNMP messages. 

Recommended: Default value 
(port 161) unless you know that 
your network management 
software uses a different port 
number.

Port 161

Numeric—
Use default 
value

System contact

SNMP MIB II system contact.

This value can be set through 
your SNMP management 
workstation.

System 
contact 
un-
known

Alphanumeric
—1 to 256*

System location

SNMP MIB II system location.

This value can be set through 
your SNMP management 
workstation.

System 
contact 
un-
known

Alphanumeric
—1 to 256*

Disable SNMP 
Queries?

Allows all queries to be 
disabled, without affecting 
traps, for higher security.

No

Yes/No