Cisco Cisco Unified MeetingPlace Audio Server Guía De Instalación
Telephony and LAN planning 3-25
February 27, 2004
Cisco MeetingPlace Audio Server Installation Planning Guide
The following is an example of how to use the blade command to configure a
DSCP value of 40.
DSCP value of 40.
N
OTE
This configuration needs to be done for each IP blade.
Connecting to the LAN
As a system manager, you need access to a Windows-based PC from which to
configure MeetingPlace using MeetingTime. The system you use does not
need to be dedicated to system management—you can use any PC on
the LAN.
configure MeetingPlace using MeetingTime. The system you use does not
need to be dedicated to system management—you can use any PC on
the LAN.
This section explains how to:
•
Make sure your LAN is compatible
•
Decide whether you need additional desktop workstations and network
software for end users, contacts, and attendants
software for end users, contacts, and attendants
•
Decide whether you need additional hardware and software to manage the
system
system
Enter command:
2
Enter blade slot [1..16]:
16
Type [IP]:
Card type
[ TP1610]:
Port Group
[ 1]:
Number of Ports
[120]:
1st Port
[ 46]:
IP Address [0]
[172.20.18.30]:
IP Address [1]
[172.20.18.31]:
Subnet Mask
[255.255.0.0]:
Default Gateway
[172.20.1.1]:
Base UDP Port [0]
[ 5000]:
Base UDP Port [1]
[ 6000]:
Jitter Buffer Minimum Size
[100]:
Jitter Buffer Optimization
[ 7]:
IP Precedence
[5]:
unused
Type of Service (TOS)
[ 0]:
unused
DSCP / DiffServ
[unused]:
40
RTCP Interval
[default]: