Cisco Cisco 1 GHz GainMaker Amplifier Guía De Instalación
Before You Begin
Fastener
Torque Specification
Illustration
Housing closure bolts
5 ft-lb to 12 ft-lb
(6.8 Nm to 16.3 Nm)
Housing plugs
Test point port plugs
5 ft-lb to 8 ft-lb
(6.8 Nm to 10.8 Nm)
Module securing screws
(Tx, Rx, PS, SM/LCM modules)
(Tx, Rx, PS, SM/LCM modules)
25 in-lb to 30 in-lb
(2.8 Nm to 3.4 Nm)
RF cable connector
20 ft-lb to 25 ft-lb
(27.1 Nm to 33.9 Nm)
Fiber optic cable connector
20 ft-lb to 25 ft-lb
(27.1 Nm to 33.9 Nm)
Amplifier Module Cover
GainMaker System Amplifier modules have aluminum cover attached to the chassis
with self-tapping screws. Normal field maintenance will not require the removal of
this cover.
Module and Housing Compatibility
Housing Lid
The GainMaker System Amplifier module is compatible with the GainMaker housing
The GainMaker System Amplifier module is compatible with the GainMaker housing
lid only. The amplifier will not work with System Amplifier II, II+, or III housing lids.
Housing Base
The GainMaker System Amplifier module is compatible with the GainMaker housing
The GainMaker System Amplifier module is compatible with the GainMaker housing
base. The amplifier will also work with System Amplifier II, II+, and III housing
bases.
Important: GainMaker System Amplifier modules are marked with a blue label to
Important: GainMaker System Amplifier modules are marked with a blue label to
indicate 15-ampere capability. The RF connectors in these modules are also marked
with blue. These amplifier modules must be used in conjunction with a 15-ampere
capable housing base, which again is marked with a blue label.
Note: 15-ampere capable System Amplifier III housings with the blue label and
Note: 15-ampere capable System Amplifier III housings with the blue label and
System Amplifier II or II+ housings that have been upgraded to 15-ampere capability
with an available seizure upgrade kit are compatible with GainMaker System
Amplifier modules.
OL-31156-01
17