Cisco Cisco Aironet 1240 AG Access Point Notas de publicación
15
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 12.4(10b)JA1
OL-15533-01
Caveats
Caveats
This section lists
,
access points and bridges in Cisco IOS Release
12.4(10b)JA1.
Open Caveats
These caveats are open in Cisco IOS Release 12.4(10b)JA1:
•
CSCsv36602—Files appearing on access point flash with 5-GHz serial number as filename
These files are created when radar is detected on a DFS channel. The files are created with the
filename consisting of the serial number of the radio that detected the radar and include the DFS
channel on which the radar was detected. The file is used is used when the access point is reset to
ensure that the radar detected channels are not immediately selected after the reset.
filename consisting of the serial number of the radio that detected the radar and include the DFS
channel on which the radar was detected. The file is used is used when the access point is reset to
ensure that the radar detected channels are not immediately selected after the reset.
Conditions: When radar is detected on a DFS channel.
Workaround: None. This is an expected behavior. The file should not be removed.
•
CSCsd99067—AVVID priority map incorrectly maps COS 5 to COS 7 within same VLAN.
The AVVID priority mapping in the CoS advanced parameters is incorrectly mapping the CoS value
to 7 when making a call to a wired phone in same VLAN. This situation occurs in an 802.11g
network running one 7921 and one access point.
to 7 when making a call to a wired phone in same VLAN. This situation occurs in an 802.11g
network running one 7921 and one access point.
Workaround—None.
•
CSCse34644—Shared authentication with non-native vlan is not working.
Workaround—Save the configuration, and reload the access point. When the access point comes up,
both clients authenticate. Edit the authentication SSID as follows:
both clients authenticate. Edit the authentication SSID as follows:
Add open authentication; remove shared authentication. Then remove open and add shared
authentication, and the client will associate. Save the configuration, and reload the access point.
authentication, and the client will associate. Save the configuration, and reload the access point.
•
CSCse48137—Nested repeater does not work.
A nested 1130 access point configured for open authentication and root mode station role fails to
associate with a repeater and displays this console message:
associate with a repeater and displays this console message:
*Mar 1 00:01:34.822:%DOT11-4-CANT_ASSOC: Interface Dot11Radio1, cannot associate: No
Response
*Mar 1 00:02:17.603:%DOT11-6-DFS_SCAN_COMPLETE: DFS scan complete on frequency 5560
MHz
*Mar 1 00:02:31.821:%DOT11-4-CANT_ASSOC: Interface Dot11Radio1, cannot associate: Rcvd
response from 0014.6956.5cda channel 149 801
•
CSCsf06407—Packets from Cisco 7920 phones always fall into the COS 6 queue. This problem
occurs when the stream feature is enabled.
occurs when the stream feature is enabled.
Workaround: None.
•
CSCsf27222—Unable to maintain more than 7 voice calls.
Workaround: None.
•
CSCsg74791—Time-based ACLs do not work properly on Cisco Aironet IOS access points.
The access point does not recognize the specified time-range. Either the ACL becomes active as
specified, and the access point does not recognize when the ACL becomes inactive, thus continuing
to apply the ACL; or the ACL is applied immediately when it is enabled on an interface (radio or
fa0).
specified, and the access point does not recognize when the ACL becomes inactive, thus continuing
to apply the ACL; or the ACL is applied immediately when it is enabled on an interface (radio or
fa0).