Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco
  4. Cisco Email Security Appliance C650
  5. Guía Del Usuario

Cisco Cisco Email Security Appliance C650 Guía Del Usuario

Descargar
Página de 1124
 
3-12
Cisco AsyncOS 8.0 for Email User Guide
Chapter 3      Setup and Installation
  Using the System Setup Wizard
Warning
The Cisco appliance ships with a default IP address of 
192.168.42.42
 on the Management port of 
C660/670, C360/370, and X1060/1070 systems, and the Data 1 port of C160/C170 systems. Before 
connecting the Cisco appliance to your network, ensure that no other device’s IP address conflicts 
with this factory default setting. If you are configuring a Cisco M-Series appliance, please see 
.
If you are connecting multiple factory-configured Cisco appliances to your network, add them one at a 
time, reconfiguring each Cisco appliance’s default IP address as you go.
Accessing the Web-Based Graphical User Interface (GUI)
To access the web-based Graphical User Interface (GUI), open your web browser and point it to 
192.168.42.42.
The login screen is displayed:
Figure 3-3
Logging in to the Appliance
Log in to the appliance by entering the username and password below.
Factory Default Username and Password
  •
Username: 
admin
  •
Password: 
ironport
Note
If your session times out, you will be asked to re-enter your username and password. If your session 
times out while you are running the System Setup Wizard, you will have to start over again. 
Defining Basic Configuration Using the Web-Based System Setup Wizard 
Procedure 
Step 1
Launch the System Setup Wizard 
  •
Log in to the graphical user interface as described in 
. 
  •
On brand new (not upgraded from previous releases of AsyncOS) systems, your browser will 
automatically be redirected to the System Setup Wizard. 
  •
Otherwise, on the System Administration tab, click System Setup Wizard in the list of links on the 
left.