Cisco Cisco Firepower 4110 Security Appliance
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Chapter 12 – Administering DefensePro
This chapter describes administering Radware DefensePro DDoS Mitigation and contains the following sections:
•
•
•
•
Command Line Interface
Access to the Command Line Interface (CLI) requires a serial-cable connection and a terminal emulation
application.
Radware DefensePro DDoS Mitigation supports up to five simultaneous Telnet or SSH sessions.
You can also use CLI to debug. When debugging is required, Radware DefensePro DDoS Mitigation generates a
Radware DefensePro DDoS Mitigation supports up to five simultaneous Telnet or SSH sessions.
You can also use CLI to debug. When debugging is required, Radware DefensePro DDoS Mitigation generates a
separate file, delivered in text format, aggregating all the CLI commands needed by Radware Technical Support.
The file also includes the output of various CLI commands, such as printouts of the Client table, ARP table, and so
on. You can download this file using APSolute Vision and send it to Radware Technical Support (see
Table 177: Radware DefensePro DDoS Mitigation CLI Commands and Menus
Command
Description
acl
Access control list.
classes
Configures traffic attributes used for classification.
device
Device settings.
dp
Radware DefensePro DDoS Mitigation security settings.
help
Displays help for the specified command.
login
Log in the device.
logout
Log out of the device.
manage
Device management configuration.
net
Network configuration.
ping
Pings a remote host.
reboot
Reboot the device.
security
Device security.
services
General networking services.
shutdown
Shut down.
ssh
Connect via SSH to a remote host.
statistics
Device statistics configuration.
system
Sets system parameters.
© 2016 Cisco | Radware. All rights reserved. This document is Cisco Public.
Page 226 of 281