Cisco Cisco Firepower 4110 Security Appliance
Chapter 3 – Managing Device
Operations and Maintenance
You can configure the following setup parameters for a selected DefensePro device:
•
•
•
•
•
•
•
Configuring the DefensePro Global Parameters
This section contains the following topics:
•
•
•
•
Viewing and Configuring Basic Global
Parameters
You can view and configure the following:
•
Basic device-setup parameters
•
The time and date settings on the device
•
Device hardware and software versions
To view and configure basic global parameters
1.
In the Configuration perspective, select Setup > Global Parameters.
2.
Configure the parameters, if required, and then, click Submit.
Table 8: Global Parameters: General Parameters
Parameter
Description
Device Name
(Read-only) The device name configured on the device.
Device Description
(Read-only) The device description configured on the device.
Location
The device location, if required.
Contact Information
Contact information, if required.
System Up Time
(Read-only) The length of time since that the device has been up since last
device reboot.
© 2016 Cisco | Radware. All rights reserved. This document is Cisco Public.
Page 60 of 281