Cisco Cisco 4G LTE Wireless WAN Enhanced High-speed WAN Interface Card Hoja De Datos
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Cisco 4G LTE Wireless WAN EHWIC
Hardware Overview
4
Cisco 4G Wireless WAN EHWIC
OL-25146-01
Supported Cisco Antennas and Cables
lists the Cisco antennas that are supported for use on the Cisco 4G WWAN EHWIC.
.
Note
You can use the RG-174/U type cables to adapt the modem external antenna connection to any of the
EHWIC cables and antennas.
EHWIC cables and antennas.
LTE
Indicates whether LTE is in service.
Solid green—Indicates LTE is in service.
Off—Indicates LTE service is not being used.
GPS
Indicates whether the GPS is in service.
Solid green—GPS is active.
Off—Indicates the GPS is not active or not detected.
1.
TNC = threaded Neill-Concelman.
2.
SMA = subminiature version A.
Table 2
Cisco EHWIC-4G-LTE Ports and LED Indicators (continued)
Table 3
Supported Antennas
Cisco Part Number
Description
Maximum Gain and
Frequency Ranges
Frequency Ranges
Notes
4G-LTE-ANTM-D
Indoor 4G dipole
omnidirectional
omnidirectional
2 dBi
•
698-806 MHz
•
824-894 MHz
•
925-960 MHz
•
1710-1885 MHz
•
1920-1980 MHz
•
2110-2170 MHz
•
2500-2690 MHz
Multiband dipole antenna. For more information,
see
see
.
4G-ANTM-OM-CM
Indoor
ceiling-mount
omni-directional
ceiling-mount
omni-directional
698 MHz-2690 MHz
Multiband omnidirectional ceiling-mount
antenna. For more information, see
antenna. For more information, see
4G-AE010-R
Extension base
with integral
10-foot cable
with integral
10-foot cable
0.7-6.0 GHz
This is the default antenna extension base.
For more information, see
.