Cisco Cisco ONS 15310-CL SONET Multiservice Platform Guía De Instalación
2
Installing the Wall Mount Brackets for the Cisco ONS 15310-CL
78-17534-01
Wall-Mount Brackets Description
You can mount the shelf assembly in an east-west direction so that the front of the assembly faces either
left or right, or in a north-south orientation, where the front of the shelf assembly faces upward. A drip
pan is provided with the wall-mount bracket for installation sites where the ONS 15310-CL is installed
over a combustible surface. Attachment points for the tie-bar (15310-TIE-BAR-19) are also provided to
allow for cable management.
left or right, or in a north-south orientation, where the front of the shelf assembly faces upward. A drip
pan is provided with the wall-mount bracket for installation sites where the ONS 15310-CL is installed
over a combustible surface. Attachment points for the tie-bar (15310-TIE-BAR-19) are also provided to
allow for cable management.
shows installed wall-mount brackets and ONS 15310-CL in an east-west orientation.
Figure 1
ONS 15310-CL Wall-Mount Brackets (East-West)
shows installed wall-mount brackets and ONS 15310-CL in a north-south orientation.
Note
If installing the ONS 15310-CL in a north-south orientation, make sure you install it so the expansion
slot faces upward. Do not install the chassis facing downward because the drip pan will physically
interfere with cabling.
slot faces upward. Do not install the chassis facing downward because the drip pan will physically
interfere with cabling.
151569
Attaches drip pan to the
plywood through the bracket