Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica

Use the Retrieve Condition STM4 (RTRV-COND-STM4) command to retrieve all conditions on a 
specific STM4 port. The RTRV-COND-STM4 command is listed as RTRV-COND-<MOD2ALM> in 
the Cisco ONS 15454 SDH, Cisco ONS 15600 SDH, and Cisco ONS 15310-MA SDH TL1 Command 
Guide. STM4 is just one of the options you can enter. RTRV-COND-STM4 is from the Fault category.

RTRV-COND-<MOD2ALM>:[<TID>]:<AID>:<CTAG>::[<TYPEREQ>],[<LOCN>],[<DIRN>];

TID is the name of the node you want to access. If you only want to query the node you connected 
to leave the TID blank.

AID indicates slot and port.

CTAG is any non-blank character series that does not have to be unique.

TYPEREQ is the type of condition to be retrieved. A null value is equivalent to ALL.

LOCN is the location associated with a particular command.

DIRECTION is the PM count retrieval direction.

RTRV-COND-STM4:TID:FAC-2-1:229::LOS;

Cisco ONS 15310-MA SDH

Input Example:

RTRV-COND-STM4::STM4-3-2-1:1;

   SID DATE TIME 
M    CTAG COMPLD
   
“<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],[<OCRDAT>],[<OCRTM>],<LO
CN>,<DIRECTION>,[<DESC>]”;

AID shows the port in question.

AIDTYPE shows the type of the port.

NTFCNCDE is the 2-letter notification code. Values are CL (cleared), CR (critical), MJ (major), 
MN (minor), NA (not alarmed), and NR (not reported).

TYPEREP is the condition itself.