Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica
24
•
SRVEFF is the effect on service caused by the alarm condition. Values are NSA (not service
affecting) or SA (service affecting).
affecting) or SA (service affecting).
•
OCRDAT is a date and is optional.
•
OCRTM is a time and is optional.
•
LOCN is the location associated with a particular command.
•
DIRECTION is the PM count retrieval direction.
•
DESC is a condition description.
Cisco ONS 15454 SDH and Cisco ONS 15600 SDH
Response Example:
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“STM4-3-2-1,STM4:MN,LOS,SA,10-25,03-07-26,NEND,RCV,\"Loss Of Signal\””
;
M 001 COMPLD
“STM4-3-2-1,STM4:MN,LOS,SA,10-25,03-07-26,NEND,RCV,\"Loss Of Signal\””
;
Cisco ONS 15310-MA SDH
Response Example:
"STM4-3-2-1,STM4:MN,LOS,SA,10-25,03-07-26,NEND,RCV,\"Loss Of Signal\""
"STM4-3-2-1,STM4:NR,TX-AIS,NSA,10-25,03-07-26,NEND,TRMT,\"Alarm Indication Signal in
TX\""
TX\""
RTRV-ALM-ALL
Use the RTRV-ALM-ALL command to retrieve all of the alarms on the system. RTRV-ALM-ALL is
from the Fault category.
from the Fault category.
Input Format:
RTRV-ALM-ALL:[<TID>]:[<AID>]:<CTAG>::[<NTFCNCDE>],[<CONDITION>],[<SRVEFF>],[<L
OCN>],[<DIRN>],[,];
OCN>],[<DIRN>],[,];
•
TID is the name of the node you want to access. If you only want to query the node you connected
to, leave the TID blank.
to, leave the TID blank.
•
AID is the access identifier.
•
CTAG is any non-blank character series that does not have to be unique.
•
NTFCNCDE is the 2-letter notification code. Values are CL (cleared), CR (critical), MJ (major),
MN (minor), NA (not alarmed), and NR (not reported).
MN (minor), NA (not alarmed), and NR (not reported).
•
CONDITION is the type of alarm condition.