Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica
28
RTRV-EQPT
Use the Retrive Equipment (RTRV-EQPT) command to retreive the data, state, and shelf parameters
associated with an equipment unit.
associated with an equipment unit.
Input Format:
RTRV-EQPT:[<TID>]:<AID>:<CTAG>[::::];
•
TID is the name of the node you want to access. If you only want to query the node you connected
to, leave the TID blank.
to, leave the TID blank.
•
AID indicates slot and port.
•
CTAG is any non-blank character series that does not have to be unique.
Cisco ONS 15454 SDH and 15600 SDH
Input Example:
RTRV-EQPT:MIRABEL:SLOT-12:230;
Cisco ONS 15310-MA SDH
Input Example:
RTRV-EQPT:MIRABEL:SLOT-1:230;
Response Format:
SID DATE TIME
M CTAG COMPLD
“<AID>:<AIDTYPE>,<EQUIP>,<EQUIP>,,[<STATUS>]:[CARDNAME=<CARDNAME>],
M CTAG COMPLD
“<AID>:<AIDTYPE>,<EQUIP>,<EQUIP>,,[<STATUS>]:[CARDNAME=<CARDNAME>],
[CARDMODE=<CARDMODE>],:[<PSTPSTQ>,<SSTQ>]”;
•
AID shows the port in question.
•
AIDTYPE shows the type of the port.
•
EQUIP indicates if the equipment is physically present.
•
STATUS indicates a status. SDH card status is shown on its card level.
•
CARDNAME the manufacturing name of the card when it is different from the
EQUIPMENT_TYPE.
EQUIPMENT_TYPE.
•
CARDMODE indicates card mode. card mode is applicable to cards that have multiple
capabilities, for example, the ML-Series card can operate in two distinct modes: Linear Mapper
mode and L2/L3 mode.
capabilities, for example, the ML-Series card can operate in two distinct modes: Linear Mapper
mode and L2/L3 mode.