Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica
26
Cisco ONS 15454 SDH and Cisco ONS 15600 SDH
Response Example:
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“SLOT-2,EQPT:MN,PWRRESTART,NSA,08-01,14-25-59,,:\“POWER FAIL
RESTART\”,E1-N-14”;
M 001 COMPLD
“SLOT-2,EQPT:MN,PWRRESTART,NSA,08-01,14-25-59,,:\“POWER FAIL
RESTART\”,E1-N-14”;
Cisco ONS 15310-MA SDH
Response Example:
TID-000 1998-06-20 14:30:00
M 001 COMPLD
M 001 COMPLD
"SLOT-4,EQPT:CR,BKUPMEMP,SA,10-25,04-02-45,NEND,NA:\"Primary Non-Volatile Backup
Memory Failure\",CTX-2500";
Memory Failure\",CTX-2500";
RTRV-COND-ALL
Use the Retrieve Condition All (RTRV-COND-ALL) command to retrieve all of the conditions on the
system. RTRV-COND-ALL is from the Fault category.
system. RTRV-COND-ALL is from the Fault category.
Input Format:
RTRV-COND-ALL:[<TID>]:[<AID>]:<CTAG>::[<TYPEREQ>],[<LOCN>],[<DIRN>];
•
TID is the name of the node you want to access. If you only want to query the node you connected
to, leave the TID blank.
to, leave the TID blank.
•
AID is the access identifier.
•
CTAG is any non-blank character series that does not have to be unique.
•
TYPEREQ is the type of condition to be retrieved. A null value is equivalent to ALL.
•
LOCN indicates the location.
•
DIRECTION is the direction of PM relative to the entity identified by the AID.
Cisco ONS 15454 SDH and Cisco ONS 15600 SDH
Input Example:
RTRV-COND-ALL:TID::229::LOS;