Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica

TID-0001998-06-20 14:30:00
M  001 COMPLD
  “STM4-3-2-1,STM4:CVL,NEND,,1,15-MIN”;

Use the Operate Link (OPR-LPBK-STM4) command to establish a loopback. The OPR-LPBK-STM4 
command is listed as OPR-LPBK-<MOD2> in the Cisco ONS 15454 SDH, Cisco ONS 15600 SDH, 
and Cisco ONS 15310-MA SDH TL1 Command Guide. STM4 is just one of the options you can enter. 
OPR-LPBK-E1 is from the Troubleshooting and Test Access category. 

OPR-LPBK-STM4:PTREYES:FAC-4-1:203::NEND,,,FACILITY;

TID is the name of the node you want to access. If you only want to query the node you connected 
to, leave the TID blank.

AID indicates slot and port.

CTAG is any non-blank character series that does not have to be unique.

LOCATION is the location where the operation is to be carried out.

LPBKTYPE is a loopback type and is optional. LPBKTYPE can be CRS, FACILITY, TERMINAL, 
LINE, PAYLOAD, or FE-CMD-ESF-PAYLOAD.

OPR-LPBK-STM4:PTREYES:STM4-4-1-2-13:203::NEND,,,FACILITY;

Cisco ONS 15310-MA SDH

Input Example:

OPR-LPBK-STM4::STM4-3-2-1:1::NEND,,,FACILITY;

Use the Release Loopback (RLS-LPBK-STM4) command to release a loopback. The RLS-LPBK-STM4 
command is listed as RLS-LPBK-<MOD2> in the Cisco ONS 15454 SDH, Cisco ONS 15600 SDH, 
and Cisco ONS 15310-MA SDH TL1 Command Guide. STM4 is just one of the options you can enter. 
RLS-LPBK-STM4 is from the Troubleshooting and Test Access category.

RLS-LPBK-<MOD2>:[<TID>]:<SRC>:<CTAG>::[<LOCATION>],,,[<LPBKTYPE>];