Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica

TID is the name of the node you want to access. If you only want to query the node you connected 
to, leave the TID blank.

SRC is an access identifier ALL.

CTAG is any non-blank character series that does not have to be unique.

LOCATION is where the operation is to be carried out.

LPBKTYPE is a loopback type and is optional. LPBKTYPE can be FACILITY or TERMINAL.

RLS-LPBK-STM4:PTREYES:FAC-4-1-3:203::NEND,,,FACILITY;

Input Example:

RLS-LPBK-STM4::STM4-3-2-1:1::NEND,,,FACILITY;

When you have finished using TL1, you must log out of the session. Logging out of TL1 only has to 
be done once per session.

If you logged into TL1 via Cisco Transport Controller (CTC), you must log out by pressing 
the Disconnect button or by issuing the CANC-USER command as shown in the following 
steps.

If you logged into TL1 via Telnet or craft interface, you must log out by issuing the 
CANC-USER command.

CANC-USER:[<TID>]:<USERID>:<CTAG>;

TID is the name of the node you want to access. If you only want to query the node you 
connected to, leave the TID blank.

USERID is the user ID. Maximum 10 alphanumeric characters.

CTAG is any non-blank character series that does not have to be unique.

CANC-USER:PETALUMA:DXT:100;