Cisco Cisco MeetingPlace Instant Messaging Guía De Instalación Rápida
Configuring Call Control for Cisco Unified MeetingPlace
How to Configure Call Control for Video Conferencing with H.323 Endpoints
17
Configuring Cisco Unified Communications Manager 6.1 or a Later Release:
H.323 Endpoints
H.323 Endpoints
Perform this task only if Cisco Unified Communications Manager provides dial plan resolution for your
network.
network.
Before You Begin
•
Complete the
•
You perform this task in the Cisco Unified Communications Manager Administration pages.
Because the pages and menus vary by release, you should check the Cisco Unified
Communications Manager Administration online help for step-by-step instructions that are specific
to your release.
Because the pages and menus vary by release, you should check the Cisco Unified
Communications Manager Administration online help for step-by-step instructions that are specific
to your release.
Procedure
Step 1
Go to http://ccm-server/, where ccm-server is the fully-qualified domain name or IP address of the
Cisco Unified Communications Manager server.
Cisco Unified Communications Manager server.
Step 2
Log in with your Cisco Unified Communications Manager administrator username and password.
Step 3
Select Device > Phone.
Step 4
(Optional) To display a list of existing phone entries, select Find.
Step 5
Select Add New.
Step 6
Select H.323 Client in the Phone Type field.
Step 7
Select Next.
Step 8
Configure the fields described in
Table 6
Fields for Adding an H.323 Endpoint in Cisco Unified Communications Manager 6.1 or a Later Release
Field
Action
Device Name
Enter the IP address of the H.323 endpoint.
Device Pool
Select Default.
Outgoing Caller ID Pattern
Enter the extension or phone number of the H.323 endpoint.
Gatekeeper Name
Select the gatekeeper that you configured in the
.
E.164
Enter the E.164 phone number used by the H.323 endpoint.
Technology Prefix
Enter the technology prefix (type-prefix) that you configured in
in the
.
Zone
Enter the zone name (gk-zone-name) that you configured in
in the
.