Cisco Cisco Unified MeetingPlace Web Conferencing Guía De Instalación Rápida
Using the Command-Line Interface (CLI) in Cisco Unified MeetingPlace
Command Reference
15
Database Replication Commands
Note
:
•
The MeetingPlace Database services must be running on the Application Server.
•
You must be logged in to the CLI as the
user.
The output messages from each command execution are displayed on the screen and stored in a log file
under the directory $MP_LOGDIR/database/replication/logs. The log file names have the format
mp_replication_log.<YYYY-MM-DD_hh-mm-ss>.
under the directory $MP_LOGDIR/database/replication/logs. The log file names have the format
mp_replication_log.<YYYY-MM-DD_hh-mm-ss>.
Table 3
Command Reference: Database Replication Commands
Command
Description
mp_replication init
Makes necessary changes in configuration files and database to enable the Application
Server to use database replication. Run this command on each node involved in replication.
Server to use database replication. Run this command on each node involved in replication.
Syntax: mp_replication init -n node {1 | 2} -r remote-server eth0:0 [-v]
Parameters:
•
-n node—Specifies the node (within the specified site) on which you run the command.
Valid values for node are 1 and 2.
Valid values for node are 1 and 2.
•
-r remote-server—Specifies the hostname or IP address of the other Application Server
with which to establish replication.
with which to establish replication.
•
-v—Specifies verbose output.
mp_replication switchON
Starts replication between two Application Servers.
•
Run this command on node 1 only.
•
Run this command only after running the
command on each node
involved in replication.
Syntax: mp_replication switchON [-S -F from-sync] [-v]
Parameters:
•
-S -F from-sync—Indicates data synchronization between the two Application Servers.
Note
Both Application Servers must be in standby mode when the -S -F options are
used.
used.
For intra-site replication, which is used for
, specify the
hostname or IP address of the virtual network interface eth0:0.
•
-v—Specifies verbose output.
mp_replication status
Displays the status of replication between the specified servers.
Syntax: mp_replication status [-v]
Parameter: -v—Specifies verbose output.