Cisco Cisco Unified MeetingPlace for Microsoft Office Communicator Guía De Instalación Rápida
Configuring Cisco Unified MeetingPlace Directory Service
How to Configure Cisco Unified Communications Manager for Directory Service
14
Step 6
To prevent toll fraud, we recommend that you check User Must Change at Next Login.
Step 7
Select Save.
Note
If this setting is set, each user will user have to go into http://<CUCM-ipaddress>/ccmuser and change
their password. The user must in the "Cisco Unified Communications Manager User group on
Cisco Unified Communications Manager to access this page.
their password. The user must in the "Cisco Unified Communications Manager User group on
Cisco Unified Communications Manager to access this page.
What to Do Next
If you want to configure individual end user PINs, proceed to the
Otherwise, proceed to the
Configuring the End User PIN in Cisco Unified Communications Manager
This task enables Directory Service users to log in to Cisco Unified MeetingPlace over the phone if a
default credential policy is not in place.
default credential policy is not in place.
Before You Begin
•
Complete the
•
If you are using Cisco Unified Communications Manager 6.x, then complete the
•
You perform this task in the Cisco Unified Communications Manager Administration pages.
Because the pages and menus vary by release, you should check the Cisco Unified
Communications Manager Administration online help for step-by-step instructions that are specific
to your release. For details about each field, select Help > This Page.
Because the pages and menus vary by release, you should check the Cisco Unified
Communications Manager Administration online help for step-by-step instructions that are specific
to your release. For details about each field, select Help > This Page.
Procedure
Step 1
Go to http://<ccm-server>/ccmadmin/, where <ccm-server> is the fully-qualified domain name or
IP address of the Cisco Unified Communications Manager server.
IP address of the Cisco Unified Communications Manager server.
Step 2
Log in with your Cisco Unified Communications Manager administrator username and password.
Step 3
Select User Management > End User.
Step 4
Select Find.
Step 5
Select the User ID.
Step 6
Configure the PIN and Confirm PIN fields.
Step 7
If you configured a PIN that may be accessed or guessed by someone other than the intended user, then
we recommend completing the following steps to prevent toll fraud:
we recommend completing the following steps to prevent toll fraud:
a.
Select Edit Credential.
b.
Check User Must Change at Next Login.
c.
Select Save.