Cisco Cisco VC240 Bullet Network Camera Manual De Mantenimiento
Configuring the Cisco VC240 Network Camera Software
Applications > Events
Cisco VC240 Bullet Network Camera
79
6
For example, if both the Send pre-event images and Send post-event
images are set to seven, a total of 15 images are captured after a trigger
is activated. The default is 1 image.
images are set to seven, a total of 15 images are captured after a trigger
is activated. The default is 1 image.
-
File Name Prefix—Enter the text to be added in front of the file name.
-
Add date and time suffix to file name—Select this option to add a date
and time after the file name.
and time after the file name.
•
Video Clip—Sends video clips when a trigger is activated.
-
Source—Select to record video clips from stream 1 or stream 2.
-
Pre-event Recording—Specify to record video clips for a number of
seconds before a trigger is activated. Up to nine seconds can be set.
seconds before a trigger is activated. Up to nine seconds can be set.
-
Maximum duration— Specify to record video clips for a number of
seconds before a trigger is activated. Choices are from 1 to 10 seconds;
the default is 5 seconds.
seconds before a trigger is activated. Choices are from 1 to 10 seconds;
the default is 5 seconds.
-
Maximum file size—Specify the maximum file size. Range is from 50 to
800 kb. The default is 500 kb.
800 kb. The default is 500 kb.
-
File Name Prefix—Enter the text to be added in front of the video clip
name.
name.
•
System Log—Select to send a system log when a trigger is activated.
•
Instant Message—Sends an IM message when a trigger is activated.
-
Message—Enter the message to be sent when a trigger is activated.
When completed, click OK to take effect. The new media name appears in the
media drop-down list on the Application > Events page. To remove a media
setting from the list, select a media name from the drop-down list and then click
Delete. If a media setting is currently applied to an event setting it can’t be edited
or deleted.
media drop-down list on the Application > Events page. To remove a media
setting from the list, select a media name from the drop-down list and then click
Delete. If a media setting is currently applied to an event setting it can’t be edited
or deleted.