Cisco Cisco VC240 Bullet Network Camera Manual De Mantenimiento

Applications > Events

Cisco VC240 Bullet Network Camera

80

Click Add to open up a window where you name an event, and configure the 
details that trigger the event, when to act upon it, and what action to take.

•

Event name—The unique name for a recorded event. The maximum length 
is 40 characters, and the following characters are not allowed: spaces, <, >, 
&, `, ’, or ”.

•

Enable this event—Check to enable recording of this event.

•

Priority—Select the relative importance of this event. Choose from High, 
Normal, and Low.

•

Wait at least___ seconds before detecting next event—The delay to 
check for the next event. This field is used with motion detection and digital 
input triggers. The default is 10 seconds.

•

Video motion detection—Select the windows that need to be monitored. 
Motion Detection must be set first.

•

Periodically—Trigger the event in specified intervals. The unit of trigger 
interval is in minutes. The default is 1 minute.

•

Digital input—Allows you to monitor digital input.

•

System boot—Trigger the event when the system boots up. Useful if the 
trigger is caused by a loss of power or tampering.

•

Event Schedule—Select the specific days that you would like recording to 
occur.

•

Time—Select when to record. Choices are Always, or a specific time 
period in a 24-hour time format.