Cisco Cisco Video Surveillance 3630 IP Camera Guía De Instalación
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel:
Tel:
408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the
United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the
word partner does not imply a partnership relationship between Cisco and any other company. (0705R)
United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the
word partner does not imply a partnership relationship between Cisco and any other company. (0705R)
© 2013 Cisco Systems, Inc. All rights reserved.
OL-28644-01
Cisco Video Surveillance 3421V IP Camera
Model CIVS-IPC-3421V
Model CIVS-IPC-3421V
The default setting is HTTPS, which allows only HTTPS (secure) connections
to the IP camera.
to the IP camera.
Step 6
Click Apply and wait for the IP camera to reboot.
Step 7
After the IP camera reboots, start Internet Explorer, enter
protocol://ip_address in the Address field, then press Enter.
protocol://ip_address in the Address field, then press Enter.
Replace protocol with HTTPS or HTTP. (You can use HTTP only if you
enabled it Step 5.) Replace ip_address with the IP address that you used in
Step 1.
enabled it Step 5.) Replace ip_address with the IP address that you used in
Step 1.
Step 8
If you are prompted to install ActiveX controls, follow the on-screen
prompts to do so. ActiveX is required to view video from the IP camera.
prompts to do so. ActiveX is required to view video from the IP camera.
The Home window appears. You can now click View Video to view live
video, click Setup to configure the IP camera, or click Logout to exit
video, click Setup to configure the IP camera, or click Logout to exit
5
Where to go from Here
For detailed information about understanding, installing, configuring, operating,
administering, and troubleshooting the IP camera, see the following documents that
are available at
administering, and troubleshooting the IP camera, see the following documents that
are available at
:
•
Cisco Video Surveillance 3421V IP Camera Installation Guide
•
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
6
Technical Support
To request technical assistance, contact the Cisco Technical Assistance Center (TAC)
in one of the following ways:
in one of the following ways:
•
E-mail—tac@cisco.com
•
Phone—In North America: 800 553-2447
Outside North America: 408 526-7209
Outside North America: 408 526-7209
Q
UICK
S
TART
G
UIDE